Javascript required
Skip to content Skip to sidebar Skip to footer

Installing Continuous Ink to Pixma Mg2522

Its more economical to install a continuous ink supply system on your printer, rather than keep buying new cartridges, continually refilling your cartridge. This tutorial will teach you how to install this on your printer.

Contents

  • 1 Advantages of a Continuous Ink Supply System
  • 2 Instructions
  • 3 Materials Required
  • 4 Instructions
  • 5 Tips Tricks & Warnings
  • 6 How to Save on Ink
  • 7 Questions and Answers
    • 7.1 Hi sir, I'm from Malaysia. I want to ask about my e400 Canon?
    • 7.2 Where to put the hose in the printer?
    • 7.3 How to fix the pipeline inside the printer?
    • 7.4 I HAVE A PIXMA MG3515,HOW CAN I FASTEN HOSES IN THE INTERIOR?
    • 7.5 How to make a outside refillable ink tank? for my canon E500 printer?
    • 7.6 How do I fix my printer when the ink from the ciss does not flow properly?
    • 7.7 How to drill hole the cartridge of printer pixma p200 CIS PG-705 black color?
    • 7.8 What are the sleeves needed to inject ink in to an inkjet cartridge?
  • 8 Comments
  1. 1

    It contains more ink compared to the usual cartridge

    .

    When you buy a complete set, you will see that you get more milliliters of ink.

  2. 2

    It's significantly cheaper, especially considering the total volume and the number of pages it's able to print

    .

    Because it doesn't require complicated containers, the retailers are able to sell it at a much lower price.

  3. 3

    It is not difficult to set up

    .

    It may look complicated because of the different tubes but in fact it's not that difficult to attach to your Canon printer. Once you set it up, it will be a long time before you need to replace it.

Here's what you need to do.

Gather the materials you'll need.

  • Purchase the Continuous Ink Supply System.
  • A pair of scissors.
  • Tissues or paper towels (at least one dampened).

    Ss.JPG

  1. 1

    Drill a hole into your cartridges with the tools provided in your kit

    .

    Refer to this image as a guide on where you will make a hole plus it also indicates the color of the ink for each hole.

    222.JPG

  2. 2

    Place and secure the sleeves in place and feed the hoses into the holes you've made in the cartridges

    .

  3. 3

    Use the suction tool to introduce the ink into the cartridge. If done correctly it should look like the picture below.

  4. 4

    Install the cartridges in your printer

    .

    Make sure that the hose won't interfere with the cartridges carrier.

  5. 5

    Anchor the hose securely in place making sure there is enough leeway when the cartridge is moving from end to end. I shouldn't get hooked on the cartridge carrier. Here is a sample.

    Install Continuous Ink Supply System on Your Canon Printer 41301.jpg

  6. 6

  7. 7

  1. 1

    Classify your printouts accordingly

    .

    If it's not a very important document, choose the economical or draft option so that it won't use too much ink. Save your ink for very important documents that really need sharp fonts and solid ink.

  2. 2

    Consider if you really need to print a document

    .

    You may not actually need all the documents you print. Therefore, before even hitting the print button, consider if it's really necessary or you can work with the soft copy. These days, with the use of smartphones and tablets, there is not much need to print everything out. For example, in the past, airline tickets must be printed out because that's what you need to present at the check-in counter. Today, you can just present the soft copy of your ticket or even just give them your e-ticket code. If you can avoid printing in the first place, do so. It not only saves on your ink, you are also helping the environment by not using too much paper.

  3. 3

    Put exactly the number of pages in the printer as you need to print. This will avoid accidentally over-printing your project.

  4. 4

    Keep your printer clean all the time, especially the nozzles of the cartridge that release the ink

    .

    If there is dirt clogging the opening, your printer will print out a messy page, wasting ink. This may lead to drips as well and this can significantly consume your spare ink.

Hi sir, I'm from Malaysia. I want to ask about my e400 Canon?

Does this procedure work for all types of printers?

It should, but before you purchase the system, ask the seller if your Canon is on the approved list. It should be, as your printer is common.

Where to put the hose in the printer?

To make the canon e400 be a continuous ink printer. I don't know where the hose should be connected. I have tried: Connect the hose to the cartridge.

You can see the process from start to finish off installing the CISS to a Canon in this YouTube Tutorial. You should connect the hoses to the ink cartridges you previously drilled holes into. Be careful when you put the ink cartridge back in the printer that the hoses can't get caught on something while the printer is in action. Otherwise, you will end up with ink all over the inside of your printer!

How to fix the pipeline inside the printer?

My Model is a canon E500. I can't fix the pipeline inside the printer properly. It's always jamming the cartridge or causing some other problem. Please help. I have tried: Tried to install and fix the printerI watched this video. I didn't find any holes like in that video to strap it. I think it was caused by: No holes to strap the pipeline

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

I HAVE A PIXMA MG3515,HOW CAN I FASTEN HOSES IN THE INTERIOR?

THERE IS VERY SWALLOW SPACE FOR LOCATING HOSES IN THE INTERIOR ALSO UNLESS I DRILL SOME SLID CUT THE LET THE HOSES PASS THE INTERIOR,OR IS THE ANOTHER WAY.? IT DOES NOT CALL HOW TO PASS Through FROM EXTERIOR TO INTERIOR,ALSO HOW HOSES ARE FIX IN INTERIOR.

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

How to make a outside refillable ink tank? for my canon E500 printer?

Can you show how to make a refillable ink tank for my printer ,my printer is canon E500, I really want a refillable tank for my printer because it was cheap than buying a new internal catridge and I last more longer. . . sorry for my english language.. . I want refillable tank like HP printer.. . thank you

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

How do I fix my printer when the ink from the ciss does not flow properly?

I have installed the ciss for my canon printer. however, the ink does not flow properly may be due to low pressure. as a result, I cannot print anything as my laptop detect my printer as running out of ink, when actually I sill have a lot of ink. the ink only flow when as in the ink bottle need placed in much higher places than the printer. however if I put it in a lower places or in the same level as the printer, the ink does not flow and go back to the ink bottle. can you help me to fix this? any tips for me increase the pressure so that the ink can flow well even when I place the ink bottle at the same level as the printer? I haven't found any question similar regarding to my problem

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

How to drill hole the cartridge of printer pixma p200 CIS PG-705 black color?

I don't know how to make hole of the cartridge pixma p200 CIS PG-705 black color

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

What are the sleeves needed to inject ink in to an inkjet cartridge?

Your instructions mention sleeves. How big are they? What do they look like?

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

Comments

hardeyhatild.blogspot.com

Source: https://visihow.com/Install_Continuous_Ink_Supply_System_on_Your_Canon_Printer